CALCIUM CHLORIDE ANHYDROUS
HSN CODE 28272000
We are having Calcium Chloride Anhydrous Powder and various grade
CALCIUM CHLORIDE ANHYDROUS
In 50 Kgs. HDPE bag with HMHDP liners
Also available in various grade:-
Calcium Chloride - Gas Grade
We have actively assisted Dissolved Acetylene Gas manufacturers and developed the right grade of CaCl2 which drastically reduces the Poisoning of Cylinders. This grade of CaCl2 can also be used for desiccating other gases.
Calcium Chloride- Desiccation of Solvents & Gases
We have actively assisted several Solvent manufacturers, Dissolved Acetylene Gas manufacturers and developed the right grade of CaCl2 which drastically reduces the Poisoning of Cylinders. Grades suitable for any density of Solvents, for use in Azotropic or Azeotropic Distillation Desiccation Hydrocarbon Drying and Drying of any type of Gases are offered.
Calcium Chloride- Heat-Treatment Salt Grade
Our group was a manufacturer of Heat-treatment Salts, manufacturing under Die-Hard brand name. We are totally equipped to offer the best grade of CaCl2.
Calcium Chloride....Cement Paint Grade
We can suggest the best and/or economical grades of CaCl2 for Cement Paint Industry. Use of 2% CaCl2 in Cement or Cement Paint is very beneficial in getting good hardness in very less time of curing.
Calcium Chloride ...Graphic Grade
A quickly soluble grade is offered for this use.
Calcium Chloride...Refrigeration or Calcium Chloride Brine Grade
A Brine may be defined as liquid of low freezing point used in transmission of refrigeration without change of state. The brines commonly employed in refrigeration are Calcium Chloride CaCl2 and Sodium Chloride. Sodium Chloride is cheaper but cannot be used below minus 15C. CaCl2 of commercial grade can operate satisfactorily up to minus 40C. Use of CaCl2 above 33% should be avoided as it results in crystallization resulting in reduced efficiency. The CaCl2 selected should be adjusted to pH of around 8 and it should be free from free-acid and dirt. Colored material should not be used as it results in corrosion and scaling of the tubes. For the same reason by-product CaCl2 is not desirable as it contains Organic Chlorides which may break into Hydrogen Chloride.